TS Teer STOP vs Regular Cigarette Filters — Side-by-Side Test

📅 March 2026 · 6 min read

We tested TS Teer STOP against 6 commonly available cigarette filters across 4 criteria: tar removal rate, taste impact, reusability, and cost per use. Here are the results.

Test Methodology

Each filter brand was tested over 50 cigarettes using a standardized smoking machine (ISO 3308 protocol). Tar was measured by weight before and after filtration. Taste scores were based on a blind panel of 20 adult smokers. Reusability was measured until absorption capacity dropped below 50%.

Comparison Table

Key Findings

1. Tar Removal: TS Teer STOP Wins by a Wide Margin

TS Teer STOP removed 70% of tar — nearly double the average competitor (36.4%). The 2-stage design (acetate + activated carbon) is the key differentiator. Single-stage filters simply cannot match this performance.

2. Reusability: 6× Means 83% Less Waste

Most filter tips are designed for a single use. TS Teer STOP was reliably reusable up to 6 cigarettes — the carbon layer continued absorbing effectively until fully saturated. This dramatically reduces both cost and plastic waste.

3. Taste: Surprisingly Natural

A concern with active carbon filters is that they can taste chemical or suppress flavour. TS Teer STOP scored 9.1/10 for taste — the highest in our test — because the carbon granules are fully sealed and never contact the lips directly.

4. Value: Cheapest Per-Use Despite Premium Price

The 1200-pack costs approximately €14.99 on Amazon. With 6 uses per filter, that is €0.012 per cigarette — less than half the cost of any competing product in our comparison.

Verdict

If your goal is maximum tar reduction at the lowest cost per use, TS Teer STOP is the clear winner. The 2-stage activated carbon technology delivers performance that single-stage competitors simply cannot match — at a lower effective price point.